3
•
For pluggable equipment, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
•
Only a qualified technician should service this product. Opening or removing
covers may result in exposure to dangerous voltage points or other risks.
•
Unplug the AC coupler from the wall outlet and refer the product to quali-
fied service personnel for the following conditions:
•
When the interconnect cords are damaged or frayed.
•
If liquid has been spilled into the product.
•
If the product has been exposed to rain or water.
•
If the product does not operate normally when the operating
instructions are followed.
•
If the product exhibits a distinct change in performance.
The first thing you need to know before you begin to install the CD
1.
Before installing, make sure your PC meets these requirements
for hardware installation:
•
Microsoft Windows® 98SE, ME, 2000, XP, Vista, Mac OS or linux OS
•
Pentium® III or better, clock rate faster than 2.0GHz recommended
•
At least one free Ethernet port for 500Mbps PLC Pass Through
2.
Your PC must not be configured for another network. This means that:
•
No network clients except for Microsoft Network*, Client for Netware*
Networks, or Microsoft Family Logon* are installed.
• No network services except file and printer sharing for Microsoft Networks
or Personal Web Server* are installed
•
No network protocols except Microsoft’s TCP/IP, IPX/SPX, NetBEUI, or
Net BIOS support for IPX/SPX are installed
3.
Network installation requires two steps:
•
Install the 500Mbps PLC-Pass Through
•
For each PC to be added to the network, repeat the process
4.
Check that you have the following parts for each PC on the network:
•
Product installation guide for 200Mbps PLC Pass Through
English
