2
Installation Guide
This document describes installation of the powerline products.
Please read this document before installing the product.
This publication contains the following sections:
•
Important safety instructions
•
The first thing you need to know before you begin to install
•
Product installation guide
•
Specification
Important Safety Instructions
This product is intended for connection to the AC power line. For instal-
lation/removing instructions, refer to the Installation section. The following
precautions should be taken when using this product.
•
Please read all instructions before installing and operating this product.
•
Please keep all instructions for later reference.
•
Please follow all warnings and instructions marked on the product.
Cleaning / reservations
•
Unplug the AC coupler from the wall outlet before cleaning. Use a damp
cloth for cleaning. DO NOT use liquid cleaners or aerosol cleaners.
•
Do not operate this product near water.
•
Use only in dry conditions, not for outdoor use.
•
The total wattage of the connected devices must not exceed 2300 watts.
•
This product should never be placed near or over a radiator, or heat register.
•
This product relies on the building’s electrical installation for short-circuit
(over current) protection.
•
Ensure that a fuse or circuit breaker no larger than 120 VAC 20A or 240 VAC
16A is used on the phase conductors (all current-carrying conductors).
•
Do not allow anything to rest on the product interconnect cords.
•
Do not locate this product where people may walk on the cords.
•
The product can be operated at an ambient temperature of 40°
C
.
English
