background image

29

TM

W

ARR

ANTY

THESE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS AND LIMITATIONS:

a)  a bill of sale verifying the purchase and purchase date must be provided;

b)  defects in workmanship and material to be assessed and determined by the Service Provider;

c)  this warranty will not apply to any product or part thereof which is worn or broken or which has become 

inoperative due to abuse, misuse, accidental damage, neglect or lack of proper installation, operation or 
maintenance (as outlined in the applicable owner’s manual or operating instructions);

d)  this warranty does not apply to normal wear and tear or to expendable parts or accessories (including hose 

attachments and filters) that may be supplied with the product that by their nature have a limited life span 
and are expected to become inoperative or unusable after a reasonable period of use;

e)  this warranty will not apply to routine maintenance and consumable items such as, but not limited to, fuel, 

lubricants, vacuum bags, blades, belts, sandpaper, bits, fluids, rubber o-rings, tune-ups or adjustments;

f) 

this warranty excludes the following components that may accompany your product: 

 

(1) the carrying case, which is only for a period of 1-year from the date of original retail purchase against  

 

 

defects in workmanship and materials.

 

(2) accessories, including hose attachments and filters, which do not carry a warranty of any kind.

g)  this warranty will not apply where damage is caused by repairs made or attempted by others (i.e. persons 

not authorized by the manufacturer), and any such unauthorized repairs or attempted repairs shall void this 
warranty in its entirety;

h)  this warranty will not apply to any parts other than original parts, except to the extent that the retailer or 

manufacturer or persons authorized by either of them have repaired or replaced them;

i) 

this warranty will not apply to any product that was sold to the original purchaser as a reconditioned or 
refurbished product (unless otherwise specified in writing);

j) 

this warranty will not apply to any product or part thereof if any part from another manufacturer is installed 
therein or any repairs or alterations have been made or attempted by unauthorized persons;

k)  this warranty will not apply to normal deterioration of the exterior finish, such as, but not limited to, 

scratches, dents, paint chips, or to any corrosion or discolouring by heat, abrasive and chemical cleaners; 

l) 

this warranty will not apply to component parts sold by and identified as the product of another company, 
which shall be covered under that product manufacturer’s warranty, if any; 

m)   any products replaced by the retailer in attempt to fulfill warranty obligations is subject to the original 

product warranty conditions and related time period as initiated by the original date of purchase; if product 
is purchased in Quebec, the warranty term will be extended for a period equal to the time during which the 
Quebec retailer possesses the product in attempt to fulfill warranty obligations; replaced product will not 
default to new product warranty conditions; 

n)  the retailer and manufacturer’s sole obligation and the purchaser’s sole remedy under this warranty 

shall be as set out herein. The warranties contained herein are not transferable and are given only to the 
purchaser. FURTHER, THE WARRANTIES SET OUT HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES OR 
CONDITIONS, WHETHER EXPRESS, IMPLIED OR STATUTORY (INCLUDING SUCH AS ARISE UNDER THE 
SALE OF GOODS ACT OR THE INTERNATIONAL SALE OF GOODS ACT), ARISING OUT OF A COURSE 
OF DEALING OR USAGE OF TRADE OR OTHERWISE, INCLUDING, SUBJECT TO APPLICABLE LAW, ANY 
IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, MERCHANTABLE QUALITY, FITNESS OR 
ADEQUACY FOR A PARTICULAR PURPOSE OR USE, AND ALL OTHER SUCH WARRANTIES ARE EXPRESSLY 
DISCLAIMED BY THE RETAILER AND MANUFACTURER.

3-YEAR LIMITED WARRANTY

This MAXIMUM product is guaranteed for a period of 3 years from the date of original retail 
purchase against defects in workmanship and materials. Subject to the conditions and 
limitations described below, this product, if returned to us with proof of purchase within 
the stated warranty period and if covered under this warranty, will be repaired or replaced 
(with the same model, or one of equal value or specification), at the sole discretion of the 
Maximum Canada authorised repair centre (“Service Provider”). We will bear the cost of any 
repair or replacement and any costs of labour relating thereto.

Содержание 058-9317-8






























































Отзывы: