16
model no. 054-8364-8 | contact us 1-888-670-6682
OPER
A
TING INS
TRUCTIONS
inner flange (15) and outer flange (17) are
correct.
•
When mounting, ensure that the cutting
direction of the teeth (direction of arrow
on saw blade) and the direction-of-rotation
arrow on the blade guard match.
ADJUSTING THE CUTTING DEPTH (Fig. B)
To achieve an optimum cut, the saw blade must
not protrude beyond the material by more than
1/8” (maximum).
Lift the depth of cut lock lever (21) and raise the
saw body away from the base plate. Adjust the
required cutting depth using the depth of cut
scale (20). Turn the lock lever (21) in clockwise
direction to lock the set cutting depth.
ADJUSTING THE CUTTING ANGLE (Fig. C1,
C2)
Turn the base plate bevel lock (6) in counter-
clockwise direction to loosen the angle scale.
Tilt the base plate away from the machine until
the required cutting angle is adjusted on the
angle scale (4). Tighten the bevel lock (6) by
turning it in clockwise direction.
NOTE:
The 45° mark has a fast and positive stop. You can use this
angle exactly. If you want to use a bigger cutting angle, you can
push the bevel lock along the path
and tighten the bevel lock.
NOTE:
It is best to perform a practice cut prior to starting work.
20
21
3
1
2
Fig. B
Fig. C1
Fig. C2
