Maximum 054-8286-4, Инструкция по эксплуатации

Страница: 7 / 24

7
• Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce the risk of starting the
power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use.
Many
accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories, tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations different from those intended
could result in a hazardous situation.
SERVICE
• Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.
SAFETY GUIDELINES RECIPROCATING SAWS
• Hold the power tool by its insulated gripping surfaces when performing an
operation where the cutting accessory may contact hidden wiring or its own
cord.
If a cutting accessory contacts a “live” wire, it may cause the exposed
metal parts of the power tool to become “live” and shock the operator.
• Use clamps or another practical way to support the workpiece and secure it
to a stable platform.
Holding the work by hand or against your body leaves it
unstable and may lead to loss of control.
• Do not use dull or damaged blades. A bent blade can break easily or cause
kickback.
• Before starting to cut, turn the tool ON and allow the blade to come to full
speed. The tool can chatter or vibrate if the blade speed is too slow at the
beginning of cut and could kickback.
• Before plugging the tool in, check that the trigger switch is in the OFF
position. Accidental start-up could cause injury.
• Keep hands away from cutting area. Do not reach under the material being cut.
The proximity of the blade to your hand is hidden from your sight.
• Always wear safety goggles or eye protection when using this tool. Use a dust
mask or respirator for applications that generate dust.
S
AFETY GUIDELINES