Maximum 054-8286-4, Инструкция по эксплуатации

Страница: 10 / 24

10
model no. 054-8286-4 | contact us 1-888-670-6682
ASSEMBLY INSTRUCTIONS
INSTALLING SAW BLADE (fig 1)
1. Unplug the saw from the power supply.
2. Pull the blade-clamp lever as far as
it will go to open the tool-less blade
clamp.
3. Insert the blade until it stops, then
release the blade-clamp lever to lock
the blade in position.
4. Use your gloved hand to push in and
pull out on the blade to be sure the
blade is clamped securely.
REMOVING SAW BLADE (fig 1)
1. Unplug the saw from the power supply.
2. To remove the blade, pull the blade-clamp lever as far as it will go and, with
your gloved hand, pull the blade out of the blade clamp.
A
S
SEMBL
Y INS
TRUCTIONS
Blade-clamp lever
fig 1
NOTICE:
The blade may be installed with the teeth pointing up or down,
according to the needs of the cutting operation. Note that orbital action is
effective only when the saw blade teeth face down.
WARNING!
• Never connect the reciprocating saw to the power source when you are
assembling parts, making adjustments, installing or removing the blade,
cleaning, or when it is not in use. Disconnecting the reciprocating saw will
prevent accidental starting, which could cause serious personal injury.
• Make sure that the front end of the blade extends through the footplate
for the entire stroke length. Do not use specialty blades that are very short
or those with a significant cant. Blade must not contact footplate. A blade
which is too short or tilted could jam inside the foot and snap.
• For all work and when changing the blade, always wear protective gloves.
The sharp edges of the blade will cause personal injury. The blade can be
very hot while working.
FPO