9
SprayMate HVLP ST610EU TNT
EU
1
2
12
Assembly
1) Slide the nozzle seal (Fig. 12, 1) with the
groove (slot) facing forwards into the
nozzle (2).
2) Put the nozzle onto the gun body and find
the correct position by turning it.
3) Put the air cap onto the nozzle and tighten
it using the union nut.
4) Place the container seal (Fig. 13, 1) from
below on the feed tube (2) and slide it over
the collar, while turning the container seal
slightly.
5) Insert the feed tube with container seal
in the gun body.
14. Maintenance
Important!
NEVER operate the system
without the air filter; dirt could
be sucked in and interfere with
the function of the system.
1) Change the air filter if it is soiled (check
daily).
2) For this pull the air filter out of the unit
(Fig. 14).
3) Insert a new air filter.
In order to mount the gun more easily
apply lubricating grease (enclosed)
liberally to the O-ring at the spray
attachment (Fig. 13,
3).
15. Storage
Store unit away in a safe place with cord
wrapped around unit without any twisting.
13
1
2
3
14
