Maxima MSB220-160, Руководство пользователя

Страница: 6 / 11

CLEANING INSTRUCTIONS
:
As a precaution, always unplug your appliance before cleaning it.
1.
After using the Maxima Stick Blender and Whisk in a hot preparation, cool the bottom of the tube in cold water before
dismantling the bell from the tube. After completion of preparation, clean immediately to prevent food from sticking to
surfaces.
2. Never put the motor unit and its handle in water, clean them with a damp cloth or a sponge.
3. Blender Tube and Bell cleaning: Place the tube and bell into a suitable container with water and switch on for a few
seconds to clean the bell and tube. WARNING: Always dry the blades thoroughly after cleaning to avoid spotting.
4. Never immerse the whisk holder in water, clean it with a slightly damp cloth or sponge.
5. It is vital to clean it thoroughly between each job using a detergent or disinfectant, but never use pure bleach. For plastic
parts, do not use detergents that are too alkaline.
Troubleshooting
If it is due to a power cut if the appliance had been unplugged, release the on-off button (No.3), check the power supply and
then restart the appliance.
If it is due to overheating of the machine, release the on-off button (CB), and then unplug the appliance, wait a few minutes
for the motor to cool down and the thermal safety mechanism to be reset, and then restart the appliance.
If you cannot locate the cause of the problem: release the on-off button (CB), unplug the appliance, check below:
1.
the plug
2. that the blades are free to rotate in the bell,
3. that state of the power cord,
4. the drive shaft is free to rotate. To do this, remove the bell and test the rotation of the end of drive shaft manually.
If a malfunction occurs which is not on our list of possible faults, consult your retailer or return the appliance to the after-sales
services.