6
PNP-64
SERIAL INTERFACE
1.
Baud Rates
:
9600 Factory set. Any other on special request.
2.
Data Length :
8 Bits. (Factory set)
3.
Data Buffer :
768 Characters.
4.
Parity setting :
Absent (Factory set)
5.
Handshaking Signals :
The card gives out a BUSY signal. When the card is
ready to accept a data byte, the BUSY line is at about +9 volts. When it is unable
to accept any data, this line goes to about -9 volts.
6. Data Voltage :
RS-232 Levels.
7.
Serial Interface Connection
Note:
1) Short Together DCD, DTR and DSR on your host connector.
2) Transmit data to the Printer after turning on the power and initializing
the printer.
3) In 9 PIN D TYPE MALE Connector, DCD, DTR, DSR have following pin
Numbers:
i. DCD (1)
ii.DTR (4)
iii.DSR (6)
4) In 25 PIN D TYPE MALE Connector, DCD, DTR and DSR Pin Number as
follows :
i. DCD (8)
ii. DTR (20)
iii.DSR (6)
PNP-64 Printer
2
BUSY
3
DATA
1
GND
3 PIN RELIMATE
HOST
8
CTS
3
TxD
5
GND
9 PIN D TYPE MALE
PNP-64 Printer
2
BUSY
3
DATA
1
GND
3 PIN RELIMATE
HOST
5
CTS
2
TxD
7
GND
25 PIN D TYPE MALE