5
PNP-64
OPERATING CONTROL PANEL
Feed Button :
1)
Press the feed button to advance the paper.
2)
Feed button can also be used for printing ‘Self Test’ as follows.
Hold down the feed button & turn on the printer with Top Cover closed.
Indicator Lights
1) Power
The ‘Power’ LED is on when the printer power is on.
2) Error
The error LED blinks is on when paper is out.
INSTALLING THE PAPER ROLL
Note : The printer must be turned off before installing the paper roll.
1)
Open the printer cover by pulling the lever.
2)
Insert the paper roll as shown below
3)
Pull out the paper until it comes out from the top of the printer. Then close the
Top Cover
IMPORTANT
The power supply should be designed to provide an
instantaneous
peak current of 3
Amps.
The 8.5 Volts power supply to the print head should not be applied in the absence of the
5 Volts Logic power supply.
