Maxim 88801, Инструкция по эксплуатации, Страница: 8 / 12

7.INSTALLING THE WALL
CONTROL
Disconnect the power and remove the
existing wall plate and switch.Set all knobs
on the dual slide wall-mounted control in
the OFF position. Installation of this control
requires that a three conductor cable with
ground wire be run between the control wal
box and the ceiling fan outlet box. Make
wire connections and secure with wire nuts
supplied (Fig.12)
Speed Control (Fig.14)
Light Control
Push the Control Unit into the switch box
and secure it with the two screws at each
end of the unit (this procedure is the same
as if you were to put the original wall switch
back into the wall)Now attach the face plate
to the Wall Control. (Fig.13)
Connect BLACK wire from A.C. power
supply to BLACK wire “AC IN L” from the
wall-mounted control.Connect BLACK wire
from the ceiling fan to BLACK wire “TO
MOTORL L” from the wall-mounted control.
Connect BLUE wire from the ceiling fan to
BLUE wire “FOR LIGHT” the wall-mounted
control. Make sure to use wire nuts on all
connections.
0: POWER OFF
H: HIGH SPEED
M: MEDIUM SPEED
L: LOW SPEED
0: POWER OFF
-: POWER ON
Fig.12
Fig.13
Fig.14
7
BLACK
WHITE
L
L
M
H
0
L
M
H
0