MaxiCheck MX808TS Скачать руководство пользователя

Страница: 152 / 172

145



User Info - displays detailed information of your registered on-line Autel

account, such as your Autel ID, Name, Address and other contact

information, etc.



Device Info

– displays the registered product information, including the

Serial Number, Registration Date, Expire Date, and Warranty Period.

Update Info

The Update Info section displays a detailed record list of the product’s

software update history, including the product serial number, software

version or name, and the update time.

Service Info

The Service Info section displays a detailed record list of the device’s

service history information. Every time the device has been sent back to

Autel for repair, the device’s serial number and the detailed repair

information, such as the fault type, changed components, or system

reinstallation, etc., will be recorded and updated to the associated online

product account, which will be synchronized to the Service Info section.

User Complaint

The User Complaint screen allows you to establish a new complaint case,

as well as to view historical complaint records.

Содержание MX808TS













































































































































































Результаты поиска

Содержание MX808TS

Отзывы:

Похожие инструкции для MX808TS

Бренды по названию

Популярные бренды

MaxiCheck MX808TS, Руководство пользователя

Результаты поиска

Содержание MX808TS

Отзывы:

Похожие инструкции для MX808TS

Бренды по названию

Популярные бренды