58
Lap/Shoulder Belt Use
57
Have Child Sit in Booster
Seat
Place Booster Seat Forward-
Facing in Back Seat
Put the booster seat into Position 1.
Only use the semi-reclined position
if necessary to install the child
restraint flush against the vehicle
seat back.
Vehicle seat back must be upright.
NOTE: If your vehicle seat has
a headrest that interferes with
achieving a fl ush car seat fi t,
check your vehicle owner’s manual
to see if it can be removed,
adjusted, or if there are other
possible seating locations.
You must store the harness system when using the
Booster Seat
mode. See pages 51-55.
1
2
3
Position Lap Belt on Child
Route the lap belt portion of vehicle
belt through the booster belt path as
shown.
The lap belt should lay snugly
across the child’s upper thighs
and not on the stomach.
Buckle the Vehicle Belt
Pull up on lap belt to tighten.
4
5
Finished!
Check periodically to make sure
your child has not moved out of
position and loosened the shoulder
belt.
Position Shoulder Belt
on Child
Pull up on shoulder belt to tighten.
The shoulder belt should lay
under the EZ Out Harness Holder
as shown.
The shoulder belt should lay
snugly across the center of the
child’s shoulder and across the
chest and not on their face
or neck.
Only use the shoulder belt-
positioning guide in the
headrest if necessary to help
position the shoulder belt
correctly on the child.