15
Buckle Adjustment
for Smaller Infants
16
Reach Under the Seat
Between Base and
Shell and Through
Recline Handle
Pull buckle’s metal retainer
completely through pad and
shell.
Check Buckle
Pull up on buckle to make sure it
is secured.
The buckle
must not
pull out.
8
9
Check your child’s fit often.
If you cannot achieve a snug harness fit for your child,
see page 16.
To learn how to check harness tightness, see pages 47-49.
WARNING:
Failure to place buckle’s metal retainer
completely through pad and shell can result in serious
injury or death.
With Buckle in the 1st Slot,
Fully Recline the Car Seat
If you need to move the buckle to
the 1st slot, see pages 13-15.
Pull Up Front of Car Seat Pad
From Bottom of Seat, Pull Metal
Retainer Down and Push It Up
into Middle Slot As Shown
3
2
1
If you cannot achieve a snug harness fi t for your child, you may
need to adjust the buckle strap length as shown in this section.
Tuck Car Seat Pad Back Around
Front of Car Seat and Check Buckle
Pull up on buckle to make sure it is
secured. The buckle
must not
pull out.
Check your child’s fit often.
To learn
how to check harness tightness, see pages 47-49.
From Top of Seat, Lay the Metal
Retainer Flat Against the Shell
As Shown
4
5
1
2
3
7
Insert Buckle’s Metal
Retainer into Same Slot
As Buckle Cover
Buckle
must
face out.
