45
46
F. Installing Forward Facing
1.
Place Child Restraint in
the Back Seat
Forward Facing
Place the child restraint
flat on vehicle seat
bench and slide the
child restraint back until
it pushes against the
vehicle seat back.
continued on next page
Tighten LATCH Belt
Push down firmly while
pulling up on the free
end of the LATCH belt to
tighten.
It may be easier to tighten
the LATCH belt through
the belt path opening as
shown.
3.
2.
Connect LATCH
to Vehicle LATCH
Anchor
NOTE:
The connector’s
red release button
MUST
face away from
child restraint and the
arrows on connectors
MUST
face up.
Fasten one LATCH belt
connector to the anchor
in the vehicle seat
located in the vehicle
seat bight. Repeat
for other side of child
restraint.
Tighten Tether
Push firmly on the back
of the child restraint and
tighten tether.
4.
22-40 lbs (10.1-18 kg)
F-4
Installing Forward
Facing with LATCH
NOTE:
Review your vehicle owner’s manual for LATCH belt use.
Do not use the LATCH along with the vehicle
lap or lap/shoulder belt.
Check LATCH belt before each use. Use only
if the belt can be tightened properly and
securely.
Failure to follow these warnings can result in
serious injury or death.
Installation Tip:
Loosely attach the
tether hook before
connecting the LATCH
belt. Consult vehicle
owner’s manual for
specific location.
2
Angle
Position
