9
To Use
To avoid serious injury:
• Please refer to the manufacturer’s instructions
for the use of your infant car seat.
•
ALWAYS
install car seat facing to the rear
of the stroller.
•
ALWAYS
use the restraint system in the car
seat.
WARNING
17
To Attach Maxi-Cosi Mico
®
Infant
Car Seat
NOTES:
•
Push the parking brake down.
• Recline seat.
• If desired, remove stroller seat by following
step 17.
To access car seat adapter slots,
detach
center seat fastener by pulling up on fabric
above each seat fastener on each side
(Figure 17).
Align car seat adapters with “ribs” facing
inward as shown. Press adapters into slots
(Figure 17a), then slide down until they
“click” (Figure 17a).
Car seat must face the
handlebar.
Lower car seat onto
adapters until both sides “click” (Figure 17b).
To remove Mico car seat,
press both buttons
on car seat (Figure 17c). Lift car seat up.
To remove car seat adapters,
push tab
as shown, then slide upward and remove
(Figure 17d).
17b
17
17c
17a
17d
Mico
Mico
