R
L
17a
17d
17c
17b
17e
R
L
NO
9
To Use
To avoid serious injury:
• Please refer to the manufacturer’s instructions for the use of your infant car seat.
• ALWAYS
remove stroller seat before installing car seat.
• ALWAYS install car seat facing to the rear of the stroller (Figure 17).
• ALWAYS use the restraint system in the car seat.
WARNING
17
To Attach Maxi-Cosi Mico
®
30 Infant Car Seat
NOTES:
• Push the parking brake down.
• Remove seat from stroller frame (Reference Step 4 for seat removal).
• Car seat cannot be installed with seat (Figure 17).
• Car seat not included with model CV368, 01156C sold separately.
NOTE: Only right side adapter fits into the notch on the right side (Figure 17a).
Align car seat adapters with smooth side facing outward as shown. Press adapters into slots
(Figure 17b), then slide down until they “click.”
Car seat must face the handlebar.
Lower car seat onto adapters until both sides
“click” (Figure 17c). Pull up on car seat to be sure it is securely attached.
To remove Mico 30 infant car seat,
press both buttons on car seat (Figure 17d). Lift car seat up.
To remove car seat adapters,
push button as shown, then slide upward and remove (Figure 17e).
17
OK
NO
