Page 10 of 11
S180622
9.
If you are not an experienced R/C pilot or have not flown this type of model before, we strongly
urge you to get assistance from an experienced R/C pilot.
10.
You may use 30-minute epoxy to attach critical parts permanently (such as where the vertical
stabilizers attach to the horizontal stabilizer) and apply a threadlock compound to secure all
control and airframe components from vibration.
11.
If you have concern about the security of any factory fabrication procedure(s), you may apply
30-minute epoxy around the perimeter of such part(s) as an extra safety precaution.
12.
This model may include some plastic, fiberglass and/or carbon-fiber-reinforced parts. If you drill,
grind or sand any such part, always wear safety goggles, a particle mask and rubber gloves to
guard yourself from eye, skin and respiratory-tract irritation; never blow into the part as the dust
may blow back into your face.
13.
Minor production details (such as Mylar, vinyl or paint colors) may vary.
14.
Check the Mylar covering material’s joints and surfaces; if necessary, carefully use an iron to
secure the edges and to tighten any loosened areas. Do NOT set the iron’s temperature too high
and do NOT apply heat to any vinyl or plastic parts or markings. Recheck the Mylar covering from
time to time and retighten if necessary.
15.
If you use an electric power system, read all instructions included with your battery and charger.
Failure to follow all instructions could result in permanent damage to the battery, its
surroundings, and bodily harm! If you crash this model airplane, check whether the battery is
damaged. Do NOT attempt to use or recharge a damaged battery.
IX. LIMITED WARRANTY, LIABILITY WAIVER & RETURN POLICY
Maxford USA guarantees this kit to be free from defects in material and workmanship at the time
of purchase. All our products have been inspected in our factory and are checked again when
shipped from our warehouse. However, Maxford USA cannot directly control the materials you
may use or your final assembly process. Therefore, Maxford USA cannot in any way guarantee the
performance of your finished model airplane. Furthermore, in purchasing this product, you (the
buyer or user of this product) exempt, waive, and relieve Maxford USA from all current or future
liability for any personal injury, property damage, or wrongful death, and if you (the buyer or
user of this product) are involved in any claim or suit, you will not sue Maxford USA or any of its
representatives.
If you do not fully accept the above liability and waiver, you may request a return-merchandise
authorization number (RMA#) as explained below in item 2. If you think there is a missing,
damaged or unsatisfactory part, please read our after-sales service and return policy:
1.
Inspect your order upon delivery for any missing, damaged or unsatisfactory part(s). If you
believe there is a problem, you must call us at 562-529-3988 (Monday through Friday except
holidays, between the hours of 9 AM and 5 PM Pacific time) before you begin assembly and
within 10 days from receipt of your purchase. During this telephone conversation, and with
your support, we will determine how to resolve your concern.
2.
To request a return-merchandise authorization number (RMA#), call 562-529-3988 (Monday
through Friday except holidays, between the hours of 9 AM to 5 PM Pacific Time). If we elect to
issue you an RMA#, you must clearly mark this RMA# on the outside of the package. (No
return or exchange will be authorized after 10 days from the date of your receipt of the
product; any package delivered to us without a Maxford USA RMA# is subject to being
returned to the sender, as received, with return postage payable upon delivery.) Returned
merchandise must be in its original condition as received from Maxford USA, with no assembly
or modification, in the product’s original packing materials, complete with all manuals and
accessories. Return shipping and insurance charges must be prepaid by you, the buyer.
3.
Returned merchandise that is accepted by Maxford USA for credit is subject to a 10% to 20%
restocking fee (the final amount will be determined by Maxford USA upon receipt and
examination of the returned merchandise).
IMPORTANT:
Print the RMA# issued by Maxford USA on your package
near our address.
