Page 2 of 11
S180622
I. SPECIFICATIONS
*
*
Wingspan ...................................................................................................................................................... 100 inches
Wing area ................................................................................................................................... 1,063 square inches
Length ............................................................................................................................................................ 74.8 inches
Flying weight ............................................................................................................................... around 21 pounds
Recommended center of gravity (CG) ............................... 2
3/8
- to 3-inches behind the leading edge
*
*
(Dimensions and weights are approximate.)
II. SPECIAL FEATURES
95% preassembled ARF constructed
mainly of jig-assembled, laser-cut balsa
and light plywood, with realistic-looking
prepainted fiberglass cowl.
Retractable electronic nose wheel and
spring-suspension retractable main gear.
Nacelles and firewalls are setup to accept
customer’s choice of electric power system.
Supplied stick-on scale markings.
Giant fuselage hatch for easy access to
batteries and electronics.
Remote control cargo door
Replacement and optional upgrade parts are available.
III. PARTS LIST
1.
Included items
Prebuilt and covered fuselage,
horizontal stabilizer, elevators, vertical
stabilizer, rudder, wing center secton,
wing, ailrons and engine nacelles.
Retractable landing-gear with wheels.
Prepainted fiberglass nose.
Coomposite wing and horizontal
stabilizer spars.
Scale stick-on markings.
Hardware package.
2.
Items you must supply to complete this ARF
Power system .................... Recommended: Maxford USA U35425 motors and 60A ESCs (four sets
of 400 Watt motors with compatible ESCs) and four 4S/4,000 mAh Lipo batteries.
Propellers ................................................................................................................ Four pieces of 11x7 2-blade.
Radio ......................................... Recommended: 6 channels (5
th
for retracts and 6
th
for cargo doors).
Servos ............................ As specified in the instructional video and shown on the following pages.
Epoxy and cyanoacrylate (CA) adhesives and threadlock compound.
Low-tack masking tape and common tools (screwdriver, pliers, etc.).
3.
Recommended servo extensions and Y-harnesses:
10-inch extensions, 9 ea.
18-inch extension, 1 ea.
12-inch extensions, 2 ea.
24-inch extensions, 5 ea.
15-inch extensions, 3 ea.
12-inch Y-harnesses, 5 ea.
4-1 2-wire Y Harness 1 ea.
(NOTE: Extension and/or Y-harness needs may vary
depending on the lengths of the leads installed on the servos used with this ARF, etc..)
4.
Optional parts:
Main gear and nose gear covers.
