Copyright 2016
Page
3
of 14
S161222
3.
Optional items you may choose to add
Servo extension safety clips.
Landing gear kit (for land-based operations).
III. SPECIAL FEATURES
True-to-scale multi-engine power system with six pylon-mounted nacelles.
Balsa and plywood construction semi-scale model of this unique and historic golden-era aircraft.
Major assemblies are preassembled and prepainted or precovered in Mylar.
True-to-scale “bench” surfaces on the tops of the ailerons and elevators.
Hatch on each engine nacelle.
Hatch on nose for easy access to batteries and radio-system switch.
Hatch on rear turtledeck for water-rudder servo installation and mantainance.
Includes 12 ESC throttle-control wires and 24 ESC-to-battery wires preinstalled in the wing’s center
section. Simply solder your favorite connectors to the ends of the ESC-to-battery wires.
Designed for electric, but may be converted to glow.
Capability for optional land operation.
NOTE:
When a receiver battery is
used to power your radio
system, the battery-
eliminator circuits built
into the ESCs are not used;
using our custom made two
conductor 1-to-6 multi-
harnesses ensures the ESC’s
red leads are safely isolated
from each other and from
your receiver battery.
The twelve ESC throttle-
control extensions are
included and preinstalled
in the wing’s center section.
RECEIVER:
Throttle (fronts)
Throttle (rears)
Ailerons
Elevators
Rudders
ESC
#10
ESC
#11
ESC
#12
ESC
#4
ESC
#5
ESC
#6
ESC
#9
ESC
#3
ESC
#8
ESC
#1
ESC
#2
ESC
#7
LEFT
AILERON
SERVO
RIGHT
AILERON
SERVO
NiMH
RECEIVER
BATTERY
RECEIVER
SWITCH
LEFT
ELEVATOR
SERVO
RIGHT
ELEVATOR
SERVO
RUDDER
SERVO
WATER
RUDDER
SERVO
48”
(or
2 ea.
24
”)
18”
24”
30”
30”
30”
30”
30”
30”
24”
24”
24”
24”
18”
18”
18”
18”
Y
Y
Y
1-to-6
1-to-6
