Copyright 2015 Maxford USA
Page 5
of 22 pages
#S150422
3.
Optional items you
may choose to add
Vintage-style 2
1/2
-inch diameter spoked
wheels. (NOTE: This model includes the
standard wheels pictured on instruction
manual pages 1 and 4. Learn about spoked at
http://www.maxfordusa.com/vintagestyle3
spokedwheels.aspx
.)
Maxford USA 1/5 scale pilot figure.
Servo extension safety clips.
V. SPECIAL FEATURES
Unique model of this historic pre-World War I aircraft.
Functional front and rear elevators.
Articulated pilot’s control stick.
Scale-looking functional ailerons.
Tricycle landing gear.
Constructed mainly of jig-assembled, laser-cut balsa and light plywood, with composite wing
rods, struts and airframe components.
Precovered scale-looking wings with cream color on top and semi-transparent on the bottom.
Adjustable-depth motor-mounting box, able to accept a wide range of power system options.
Outer wing panels are removable for easy transport and storage.
Black string, swivels and springs are supplied to simulate wing wires and tail-boom bracing.
Replacement parts and optional detail-upgrade items are available.
VI. ASSEMBLY INSTRUCTIONS
1.
Locate the openings for the struts and engine-mounting bearers in the bottom of the top wing’s
center section. Set the top wing’s center section aside.
2.
Locate the openings for the struts and engine-mounting bearers in the top of the lower wing’s
center section. (NOTE: As shown below, the openings for the engine-mounting bearers are
between 2 extra-wide ribs near the middle of the lower wing’s center section at approx. 1
1/2
-
inches in front of the trailing edge and
1/4
-inch behind the leading edge.)
Locations of the 4 openings for
the engine-mounting bearers in
the lower wing’s center section.
Approx.
1
1/2
-inch
Leading
edge
Trailing
edge
Approx.
1/4
-inch
