Copyright 2015 Maxford USA
Page 9
of 22 pages
#S150422
20.
Install the landing gear beneath the lower wing’s center section as pictured below:
21.
Install the rudder and elevator and their servos as
follows:
a
) Position the elevator’s
metal joiner and attach
the rudder’s hinge
assembly to the
center of the
horizontal stabilizer
with 2mm bolts and nuts
as pictured at the top of
the following page.
Center the axle
in the lower
nose-wheel strut
Upper nose-wheel struts
OUTSIDE
INSIDE
REAR
vertical engine
bearer
FRONT
vertical engine bearer
