Each LCD Meter comes with a USB port attached to the bottom of the meter to charge your mobile devices.
After 5 minutes of inactivity, the LCD Meter will automatically turn off to conserve power.
1. LCD housing material: PC. Working temperature scope: -10
℃
to +60
℃
, the shell material ensure normal use and good
mechanical performance of the product.
2. Wheel Diameter: The first setting parameter regulates the wheel diameter. Press UP (+) or DOWN (-) to choose the right
diameter
（
18-28inch
）
for the bike. Default setting is 24 inch. After confirmation of the wheel size, press MODE to save it.
3. Max Speed: The second setting parameter regulates the Maximum Speed. Please note that the speed settings should be
in accordance with local speed regulations. Outside these regulations the bike may only used on private areas or off-road.
Default max speed is 32 KMH and can be freely set between 12 and 40 KMH by using UP (+) or DOWN (-), confirm by
pressing MODE.
4. Back Light Brightness: The third setting parameter regulates the back light brightness. Press UP (+) or DOWN (-) to
modify the brightness of the back light and confirm by pressing MODE.
5. Measuring Unit: The fourth setting parameter regulates the choice of the display’s measuring unit. Press UP (+) or DOWN
(-) to choose between MPH and KMH. Press MODE to confirm the settings.
6. Press Mode for 3 seconds to save all inputs and exit. Setting mode can be exited from any point.
7. ON / OFF: Press MODE for 1.5 seconds to switch the display on. Long-press it to switch the display off. When the Display
is OFF, display and controller no longer consume power from the battery.
8. Battery Capacity: The battery capacity status is shown in the upper left corner. When battery gets low, the last bar starts
flashing at 1 Hz. This indicates a severely low battery voltage and immediate recharged is required.
