MaxFlight MT3000 ELECTRIC, Руководство пользователя

Страница: 37 / 213

37
2-5B Encoder Behavior Confirmation
For each axis, the encoder forms a closed loop with the motion control adapter to generate an analog signal
that commands the drive motor to move in a specific direction. In the formula EP=DP-AP, (DP is the
desired position, AP is the actual position and EP is the error position) a positive EP results in a positive
analog signal to move the motor in the direction which will decrease the error.
PITCH: As the unit moves clockwise (up) the encoder reading should return increasing
values (positive). The clockwise Positive registry entry for the axis is set to 1 for true.
ROLL: As the unit moves clockwise the encoder reading should return increasing values
(positive). The clockwise Positive registry entry for the axis is set to 1 for true.
LIFT: As the unit moves up, the encoder reading should return decreasing values to the
registry, where in the software we reverse the appearance of the encoder reading using the
Clockwise Positive registry entry for the axis (set to 0 for false) so that in
the application we
will see increasing values when the unit is going up in inches not degrees..
If the value moves in the opposite direction, check the clockwise positive registry entry
for that axis. If it is set correctly, check the encoder wiring.
2-6 Mitsubishi Inverter Information
2-6A Appearance and Structure
2-6B Removal of the Front Cover
The inverters are designed to work without the front cover in your MaxFlight simulator, and they should
already be removed and shipped in a separate package. Remove the front cover from new inverter as follow
when replacement is needed.