![background image](http://html1.mh-extra.com/html/maxey-moverley/vcl-orbiter-gold/vcl-orbiter-gold_quick-reference-manual_1743702007.webp)
Maxey Moverley Limited, 6 Broad Ground Road, Lakeside, Redditch, Worcestershire, B98 8YP
Web: www.cctvrepairs.com ● Email: [email protected]
Tel: 01527 522299 ● Fax: 01527 522588
Issue 1.1
| Page 7
Quick Reference Guide
VCL Orbiter Gold/Lite
6.
Coax Telemetry
Coax telemetry Orbiter Gold/Lites do not require an address setting, therefore the settings of
positions 1-7 on DILSW2 are ignored. Position 8 controls the alarm feature.
7.
Alarm Settings
Switch 8 of the 8 way DIL switch DILSW2 is used to toggle the Orbiter Gold/Lites alarm setting. When
the switch is ‘ON’ the Orbiter Gold/Lites alarm inputs are enabled and set to the default settings as
shown in the table below. If switch 8 is ‘OFF’ then the alarms are not automatically enabled, but can
be enabled and adjusted using a MaxCom with local alarm menus.
ALARM
INPUT-TYPE
PRESET
TIME-OUT
1
Normally Open
1
10 Seconds
2
Normally Open
2
10 Seconds
3
Normally Open
3
10 Seconds
4
Normally Open
4
10 Seconds