![background image](http://html1.mh-extra.com/html/maxey-moverley/vcl-orbiter-gold/vcl-orbiter-gold_quick-reference-manual_1743702003.webp)
Maxey Moverley Limited, 6 Broad Ground Road, Lakeside, Redditch, Worcestershire, B98 8YP
Web: www.cctvrepairs.com ● Email: [email protected]
Tel: 01527 522299 ● Fax: 01527 522588
Issue 1.1
| Page 3
Quick Reference Guide
VCL Orbiter Gold/Lite
Step 2
Align the lug on the Orbiter Gold/Lite with the slot on the bracket. Carefully push the Orbiter
Gold/Lite into the bracket and twist clockwise. Allow to drop into the retainer, see Figure 2.
Figure 3.
Fitting the Orbiter Gold/Lite into the bracket
Step 3
Fit the M3 CSK safety locking screw into the bracket to lock the Orbiter Gold/Lite in place. This is
ESSENTIAL for the safe operation of the Orbiter Gold/Lite. (The hole for the screw is on the opposite
side of the pole to the slot.)
Step 4
Attach the cable cover. This is supplied in two halves which snap together over the neck of the
Orbiter Gold/Lite as shown in Figure 4, below.
Figure 4.
Fitting the Cable Covers.