EN-8
EN
Getting Started
Prepare the Smart Remote Control
The Smart Remote Control provided allows
the unit to be operated from a distance.
Even if the Smart Remote Control is
operated within the effective range
(6m), remote control operation may
be impossible if there are any obstacles
between the unit and the remote control.
If the Smart Remote Control is operated
near other products which generate
infrared rays, or if other remote control
devices using infrared rays are used
near the unit, it may operate incorrectly.
Conversely, the other products may
operate incorrectly.
For First-time use:
The unit has a pre-
installed lithium CR2025
battery. Remove the
protective tab to
activate the remote
control battery.
To Replace the Smart Remote Control Battery:
(A) : Press down the flip on the left.
(B) : Pull out the battery tray and remove
the old battery.
(C) : Place a new CR2025 battery into the
battery tray with correct polarity (+/-)
as indicated.
(D) : Insert the tray back into the slot.
Precautions Concerning Batteries
When the Smart Remote Control is not
to be used for a long time (more than a
month), remove the battery from the
Smart Remote Control to prevent it from
leaking.
If the batteries leak, wipe away the
leakage inside the battery compartment
and replace the batteries with new ones.
Do not use any batteries other than
those specified.
Do not heat or disassemble batteries.
Never throw them in fire or water.
Do not carry or store batteries with other
metallic objects. Doing so could cause
batteries to short circuit, leak or explode.
Never recharge a battery unless it is
confirmed to be a rechargeable type.
