Maxell MXSP-SB3000, Инструкция по эксплуатации

Страница: 12 / 16

EN-12
EN
Connect to a Bluetooth Device
You can listen to music from a Bluetooth-
enable device via this player.
Pair the Bluetooth-enabled devices
The first time you connect your Bluetooth
device to this player, you need to pair your
device to this player.
Note:
- The operational range between
this player and a Bluetooth device is
approximately 8 meters.
- Before you connect a Bluetooth
device to this unit, familiarize
yourself with the Bluetooth
capabilities of the device.
- Compatibility with all Bluetooth
devices is not guaranteed.
- Any obstacle between this unit and
a Bluetooth device can reduce the
operational range.
- Keep this player away from any
other electronic device that may
cause interference.
1. Turn on the Bluetooth function on your
device.
2. Switch player's source to Bluetooth,
Display panel shows "BT", then show
"NO BT" (if there's no Bluetooth device
connected).
3. Press and hold "PAIR" button on remote
control or on top of the unit to
activate Bluetooth pairing mode,
display panel shows "PAIRING".
4. Search for Bluetooth device with your
device.
5. Select “MXSP-SB3000” in the pairing list.
6. Enter “0000” when prompted for a
keyword(If necessary), if the pairing
succeeds, display panel shows "BT"
again.
7. To disconnect connection, turn off the
Bluetooth function on your device or
switch the player to other source.
Connections
Tip
- If there's a connection exist, hold and
press “PAIR” button on remote control
or on top of the unit for seconds
will reactivate the pairing mode, the
connection will be interrupted.
- If there's no other Bluetooth device pair
with this player in two minutes, the player
will recovery previous connection.
- The player will also be disconnected
when your device is moved beyond
the operational range.
- If you want to reconnect your device
to this player, place it within the
operational range.
- If the device is moved beyond the
operational range, when it is brought
back, please check if the device is still
connected with the player.
- If they are connected, display panel
shows "BT".
- If the connection is lost, display panel
shows "NO BT", follow the instruction
above to pair your device to the player
again.
Listen to music from Bluetooth device

If the connected Bluetooth device
supports Advanced Audio Distribution
Profile (A2DP), you can listen to the
music stored on the device through the
player.

If the device also supports Audio Video
Remote Control Profile (AVRCP) profile,
you can use the player's remote control
to play music stored on the device.
1. Pair your device with the player.
2. Start play music via your device (if it
support A2DP)
3. Use supplied remote control to
control play(if it support AVRCP)
- To pause/resume play,
press the
BF
button.
- To skip to a track, press the
H
/
G
buttons