Maxcom Office KXT400, Быстрый старт

Страница: 5 / 7

5
1. In on
–hook or off-hook state
2. Press [OUT] key, LCD displays the last dialed number.
3. Press [OUT]
key continuously, LCD displays…END…
Dial back outgoing Call
1. In on-hook state.
2. Press [OUT] key to check the desired number.
3. Press [BACK] key the number will be dialed out automatically, then pick up the handset
to conversation. If the line is busy, press [REDIAL] key to dial out the number repeatedly.
Deleting outgoing Call
1. In on-hook state, press [OUT] key to check the number.
2. Press [DEL] key to erase the number, and LCD displays the next number.
NOTE
Press [DEL] key for 3 seconds, all the outgoing calls will be erased.
SETTING MENU
SETTING DATE AND TIME
1. In on-hook state, press [SET] key, LCD displays SET 1 DATE
2. Press [SET] key, the last two digits of year flash.
3. Press [UP] or [DOWN] key to edit the year, Press [SET] key to confirm, by using the
same method to set the month, date, hour and minute.
Unit will save and quit after 12 seconds.
NOTE
Scope: Month: 1-12 Date: 1-31 Hour:00-23 Minute:00-59
SETTING LOCAL AREA CODE
1. At on-hook state, press [SET] key and then press [UP] key, LCD will display SET 2 CODE
2. Press [SET] key again, LCD displays CODE- - - - -
3. Press [UP] or [DOWN] key to set the first digit of local area code;
4. Press [SET] key to confirm and enter the second digit setting, by using the same method
to set the last 4 digits.
5. Unit will save and quit after 12 seconds.
NOTE:
If the local area code only 4 digits, the last digit can be left as “-”.
After set the local area code, unit will auto-filter the area code if the incoming call number with
the first several bits as same as the local area code.
SETTING PABX CODE
1. At on hook state, press [SET] key