6
2. Press
[UP]
key 2 times, LCD displays
SET 3 PCODE
.
3. Press
[SET]
to confirm, LCD displays
PCODE--
4. T
he first “-“ flicker and indicate to set the first code.
5. Press
[UP]
or
[DOWN]
key to set the first code, Press
[SET]
key to confirm to enter the
next one.
6. Unit will save and quit after 12 seconds.
NOTE
If only one digit of PABX code, left the second digit as“-“.
If set PABX code, when dialing back incoming call, and if the incoming number is more than 6
digits, unit will auto-add PABX ahead the number and pause 1 second.
FLASH AND PAUSE FUNCTION
The flash time is 100ms. This function works in PABX. Press
[FLASH]
key to perform flash
function.
Press
[PAUSE]
key will give a 3.6s pause interval after press one or more digit.
HOLD MUSIC FUNCTION
When talking over handset, press
[HOLD]
key to enter the hold mode and the hold music is
sent out. In hold mode:
Press
[HOLD]
key to release hold mode and continue to talk over handset.
SETTING RINGER VOLUME
There are two levels of ringer volume High or Low for selection. Slide the RING switch to HI or
LO for selection.
SETTING DIALING MODE
Slide the
P/T
switch to
P
for pulse dialing while
T
for tone dialing accordingly.
SETTING THE LCD BRIGHTNESS
In off-hook state, press
[BRI]
key continually to adjust the LCD brightness, total 5 levels.
LCD BACKLIGHT FUNCTION
The backlight is turned on when receiving an incoming call, dialing, pressing any key or in
MUSIC HOLD mode. It will fade off if the telephone is left idle for 6 seconds.
NOTE: If batteries are not loaded, there will be no LCD backlight function.
Содержание Office KXT400
Страница 2: ...2 LOCATION DESCRIPTION...
