Maxcess Magpowr COMMKIT-DN, Инструкция по эксплуатации, Страница: 4 / 10

Number Description Type Read/Write
2 UserConfigLengthUnits INT Read/Write
0=inches, 1=feet, 2=millimeters, 3=centimeters, 4=meters
3 UserConfigVelocityUnits INT Read/Write
0=inches per minute, 1=feet per minute, 2=millimeters per minute,
3=centimeters per minute, 4=meters per minute
4 UserConfigTimeUnits INT Read/Write
0=seconds, 1=minutes, 2=hours
5 UserConfigInertiaUnits INT Read/Write
0=pounds*feet^2, 1=kilograms*meter^2
6 AutoManualState INT Read/Write
0=Automatic, 1=Manual
7 HoldLevelChangesWith INT Read/Write
0=None, 1=Output, 2=Tension, 3=Diameter, 4=Diameter and Tension
8 InertiaAccelState INT Read/Write
0=Off, 1=On
9 InertiaCompState INT Read/Write
0=Off, 1=On
10 NewRollFeature INT Read/Write
0=No, 1=Yes
11 SpliceFeature INT Read/Write
0=No, 1=Yes
12 SystemType INT Read/Write
0=Unwind, 1=Rewind, 2=Type 1, 3=Type 2, 4=Type 3, 5=Type 4
13 TaperOnOffState INT Read/Write
0=Off, 1=On
14 TensionAlarmState INT Read/Write
0=Off, 1=On
15 AutoTuneControlType INT Read/Write
0=PI, 1=PID, 2=I only
16 DA_SensorPositiveBias INT Read/Write
17 DA_SensorNegativeBias INT Read/Write
18 DA_ADC_Reference INT Read/Write
19 Not Used --- ----
20 GainSchedulingFlag INT Read/Write
0=Off, 1=On
21 CalibrationTensionBin INT Read/Write
22 OutOfRoundCompFlag INT Read/Write
0=Off, 1=On
23 Not Used --- ----
24 SensorOffset INT Read/Write
25 Not Used --- ----
26 DiameterCalibrationType INT Read/Write
0=Single Point, 1=Two Point