2–4
SAFETY INSTRUCTIONS
www.maxcessintl.com
GMA-BL
MI 1-916 1 B
Basic safety
information
(Continued)
Installation and commissioning
Any GMA-BL Actuator Controller which is damaged must not be
installed or put into service.
Only perform installation, maintenance or repair tasks on the
GMA-BL Actuator Controller when the machine has been stopped
and is secured from being turned on.
Only perform installation, maintenance or repair tasks on the
GMA-BL Actuator Controller when there is no electrical power in
the system.
The GMA-BL Actuator Controller must be securely assembled into
the customer application before being placed in operation.
Only replacement parts obtained from Fife may be used.
No modifications may be made to the GMA-BL Actuator
Controller.
Do not place electrical cables under mechanical strain.
The ball screw nut must not be removed from the ball screw.
WARNING – Death or injury can result from static electric shocks.
Moving webs of material can produce large static voltage
potentials. Protect against electric shocks by installing a
conductive connection between the PE conductor of the GMA-BL
Actuator Controller and the PE circuit of the building or machine.
WARNING – Danger of injury from crushing.
The GMA-BL Actuator Controller contains moving parts which
could cause injury due to crushing. Appropriate protective guards
must be installed by the user according to his use of this product.
WARNING – Death or injury can result from unexpected
movement.
Protect against unexpected movement by removing electrical
power from the GMA-BL Actuator Controller and the machine into
which the GMA-BL Actuator Controller is being installed.
