www.maxcess.com
FIFE-500 MAX Narrow Web Guide
MI 2700XXXXX 18
CHAPTER 3
BUTTON FUNCTIONS AND DEFINITIONS
9 / 77
3.1 Button Functions and Definitions
AUTOMATIC Initiates the Automatic mode. Correction is
applied to the web by moving the guide in response to the
output of the sensor(s) that have been selected.
SERVO-CENTER Initiates the Servo-Center mode. The guide is
centered in its travel in response to the output of the internal
Servo-Center transducer.
MANUAL Initiates the Manual mode. No correction is applied
to the guide.
SENSOR Use to select the sensor(s) to be used for monitoring
the web position when the system is in Automatic mode. Sensor
selection is allowed in Manual and Servo-Center modes only.
SETUP Use to enter the Setup Menus for configuring and
adjusting the guiding system.
ARROWS Use these buttons to jog the guide. The direction of
guide movement is configurable.
JOG SPEED The button is used to adjust the speed of jogging
the guide.
LOCK SCREEN Hold 3s to lock the screen or unlock the
screen.
GUIDE POINT CONTROL Use the two arrow buttons to adjust
the System Guide Point while in Automatic Mode or Manual
Mode. Use the center button to reset the System Guide Point to
the default value, which is 50% of the sensor bandwidth. The
slider control indicates the guide point position.
GUIDE POINT CAPTURE This optional button (which can be
enabled from the “OI Settings” menu) sets the guide point of the
active sensor mode to the current web location. This allows
guiding to begin at the current web location when the Automatic
mode is initiated.
BACK Use this menu navigation button to return to the
previous menu level.
