P/N 07823341 Rev B Page 4
User Instructions
2272PB-07
Double Hood
WARNING
Refer to Users
Instructions
(P/N 03521015)
for details
on chargers
and charging
batteries.
The entire CAPR System may be
decontaminated, cleaned and ready
for next use, or stored at this time.
Doff the Hood, Helmet, Battery and Belt
!
12. With Charger connected to safe
power source, connect Charger Cord
to the Battery. Push Charger Cord
Connector into Battery Receptacle until
fully seated.
WARNING
Discard all
disposables
and body
gown per
Institutional
protocol for
contaminated
waste.
!
1. Untie both neck and
body Ties, pull through
their loops and discard
appropriately.
4. Continue to roll up both
Shrouds, inside over
outside, up and over
Helmet.
5. Unsnap each side attach-
ment and continue moving
rolled Hood forward and
off front Helmet Mounting
Post.
6. With Hood completely
off Helmet discard
appropriately.
10. Unbuckle Belt and
remove Battery and
Belt from around the
waste.
7. Doff body
gown per gown
manufacturer’s
protocol and
discard
appropriately.
8. Loosen the rear Headband
Adjustment Knob (turn
counterclockwise).
9. Lift Helmet up and off
head.
00. Disconnect the Helmet
Power Cord from the Bat-
tery - Press down on the
Secure Lock (Black) Button
to release, then pull the cord
connector out from the Bat-
tery connection receptacle.
3. Open the body gown,
reach back and pull
the Inner Shroud
up and out, to cover
Outer Shroud.
2. Roll up outer
shroud to above
the body gown.
