P/N 07823341 Rev B Page 3
User Instructions
2272PB-07
Double Hood
Don HLF and Body Gown
1. Initiate donning the HLF (Heavy Loading Filter) by tucking
its back bottom up under back bottom of Helmet.
2. Complete by pulling HLF over and down, rear-to-front, of the
Helmet and secure front bottom on Hood front Velcro strip.
2. Continue rolling and lifting HLF up, over, and off the Helmet and
discard appropriately,
or, ALTERNATIVELY,
temporarily leave it on and proceed to Doff with Hood (next section).
1. Begin HLF doffing by curling its back bottom up over Helmet back
bottom.
Doff HLF
3. Place back of outer Shroud over Helmet and don
outer gown per gown manufacturer’s protocol.
Place inner Shroud inside outer gown and close
gown. Pull outer shroud down all around gown.
4. Pull Neck ties loose from behind, pull them around in front and tie securely, within
approximately one-half inch of the neck.
Similarly, loosen body ties and pull them around and through the slots in the lower
front outer shroud, and tie securely.
