background image

 
 

  When the orange standby light blinks 

 

This indicates the Battery cannot be charged. Unplug the Charger and check the charging receptacle. If there 
are any foreign objects, remove them with a soft dry cloth. If the orange light still blinks or there are no foreign 
objects, there may be a problem with the battery or charger. Return to dealer for service. 
 
 
 

 

  Charge the Battery pack. 

Battery pack

 

Red charging 
lamp

 

Charger

 

Orange 
standby lamp

1.  Fully insert the Battery into the receptacle on the Charger until it sits securely on 

the bottom.   
 

2.  Charging will start automatically and will be indicated by the red charging light.   
 
3.  Charging time is approximately 25 minutes. This will vary by temperature and 

source voltage. 
 

4.  For batteries those are at low temperatures (5

°

C (41

°

F) or lower) or batteries that 

have not been used for extended periods, charging time must be extended longer. 
When charging at low temperatures, the red charging light will flash every 2.5 
seconds. 
 

 
Regarding tying times per charge, a brand-new battery ties approximately 400 times per charge. The tying 
times per charge will be decreased gradually by repeated re-charge until the Battery becomes unusable. The 
tying times per charge depend on temperature and the Battery condition. 
 
 
 

  Tips for maximum Battery life 

 

  If you repeatedly charge the Battery before fully using it, it will memorize an additional charging capacity 

as its maximum charge. This phenomenon is called “Memory Effect”. If this happens, the Battery’s 
capacity will be decreased, even if it is fully charged. In order to prevent the memory effect, charge the 
battery only after the tying speed slows down considerably. 
 

  Use two Battery packs alternately. 

To extend Battery life, alternate between the two batteries provided. 

  12

Содержание RB215























Отзывы: