Max-Thrust Double Trouble Balsa Pro-Built Series, Руководство пользователя

Страница: 12 / 17

12 12
Building Your Double Trouble
1. Electric Version. Screw the wooden motor mount on using the 4mm x 14mm cap head screws and
washers. Centre your motor on the mount and mark the bolt hole locations on the motor mounting plate
and then drill these to suit. Mount the brushless motor using the cap head screws and captive nuts on to
the centre line of the mount. The mount is off set to allow for 3.5 Degrees of side thrust.
3. Fit the cowl using the 3x8mm big head self tapping screws. If you want you can add an additional
cooling slot on the underside of the cowl to let the hot air out. Fit your prop and the spinner to finish off the
front section. We used a 13x6.5 Gemfan prop and suitable spinner on the prototype model.
Building Your Electric Double Trouble
2. Test fit the cowl and adjust the motor position forwards or backwards to make sure the spinner
and prop clear the cowl. Temporally hold in place with bands so you test fit the cowling. Once you have the
motor in the correct position you can glue the adjustable mount in place using 5 minute epoxy. We then
recommend running some medium C/A down all the motor mount joints and apply triangular balsa to
reinforce the joints.