max mobility SmartDrive MX2+, Руководство пользователя

Страница: 16 / 129

5425 crossings boulevard, nashville, tn 37013 usa • p: 800.637.2980 • f: 888.411.9027 • www.max-mobility.com
It is important for your safety and the safety of those around you that you are properly trained to use the SmartDrive.
Please take this training seriously and be sure to fill-in all information. If you do not understand something, just ask.
SmartDrives are shipped in MX2+ control mode with moderate Maximum Speed and Acceleration settings which allow for familiarity and
PushTracker deactivation practice prior to extensive use.
Download the PushTracker smartphone App in the Apple or Google Play App Store to quickly change SmartDrive settings and get the most
out of your Smar PushTracker. There are also instructional videos available at www.max-mobility.com that are very helpful in learning
all about your SmartDrive [use the Closed-Captions for subtitles in other languages].
1) Read the SmartDrive User’s Manual , PushTracker User’s Manual and SmartDrive MX2 + PushTracker Quickstart Guide . Please heed
all of the warnings in yellow, as this information is important for your safety. Pay close attention to situations where it is safest and necessary to
turn the SmartDrive power assist OFF [via PushTracker].
2) Demonstrate each of the skills to your dealer and check them off once you are confident with each skill:
Making sure power assist is OFF, install the PushTracker onto your wrist. Understanding that power assist should be OFF whenev-
er handling the SmartDrive [or transferring into / out of your chair] , switch the SmartDrive on and install it onto your wheelchair.
Turn the power assist ON [via PushTracker] and allow for it to wirelessly connect to the SmartDrive.
Before doing anything, practice SINGLE tapping your hand against your handrims with a stiff wrist. You will see the PushTracker
LED go red if it’s a good tap. Also practice DOUBLE taps. Continue to practice these taps until you get it every time.
Activate the motor with a DOUBLE tap, SINGLE tap to set a slow coast speed and finally DOUBLE tap then brake to stop.
Activate the motor again with a DOUBLE tap, this time setting a faster coast speed, and then DOUBLE tap brake to stop.
Once you have perfected the tapping needed by the PushTracker to activate / set the coast speed / deactivate the motor, try to activate
the motor, set a comfortable coast speed, turn in a figure 8, and then tap brake stop.
If possible, find a LONG / FLAT / OPEN space to allow the SmartDrive to ramp up to Maximum Speed. Adjust the Maximum
Speed or Acceleration to values that are comfortable in that and all predicted use environments.
If all skills are not able to be performed by the client, try the MX2 [or MX1] control mode and repeat this training.
3) Sign this form below and have the provider keep with the client’s records.
SmartDrive Serial Number: _______________________________________________ Date: ______________________
Client
I certify that I have read all the User’s Manuals / labeling and demonstrated the skills checked above. I accept that the SmartDrive can
be dangerous if not used carefully and I take responsibility for making responsible driving choices while using it. I understand there
are many situations where the power assist should be turned OFF to prevent it from unintentionally powering forward, including:
downhill slopes, up or down curbs, climbing large sidewalk cracks, while in confined spaces, before handling either the PushTracker or
SmartDrive, whenever parked and / or transferring into / out of my wheelchair.
Name: __________________________________________ Signature: __________________________________________
Provider
I have observed the client performing the skills checked above.
Name: __________________________________________ Signature: __________________________________________
SmartDrive MX2+
Training Certification
CUT OR
TEAR HERE IF NEEDED
Must be completed to ensure customer satisfaction.