Max Meyer LabelMax SP2, Руководство пользователя

Страница: 7 / 21

7
3.2 Instructions to Top Cover Operation
Please take care when opening or closing the printer’s top cover by carefully
following these instructions.
To Open:
•
When facing the front of the printer pull the cover release levers on both
sides of printer towards you.
•
Lift up the top gradually.
•
There are two stop positions for the top cover. Position 1 and 2 are
indicated on the label below.
•
Note: To hold the cover open at position 1, you must lift the cover higher
than the stopping point at position 1 and gently lower the cover to stop
position 1. DO NOT free fall the top cover!
Fully open the top cover and gently lower it to stop position 2.
Fig. 1 Top cover support is fixed at position 2