Maverix USA border cross, Руководство пользователя

Страница: 12 / 21

12
The Charger
Charging cycle
Before the first use, make sure your
MAVERIX electric skateboard has a full charge. A
full charging cycle can take 5 to 8 hours (charging time depends on the model).
Your battery will reach its maximum life after 3 or 4 charging cycles.
In order to charge your
MAVERIX skateboard, the charger (provided) plugs into an
ordinary outlet (220 volts), and into the battery block below the deck.
The batteries are fully charge when the light on the charger turns from red to green.
Caution: When the light turns green, disconnect the charger from the battery and
the wall outlet. If the battery remains in charge too long, you may damage the
charger and battery.
Never dismantle your charger even in case of failure; a residual electric current
always remains in a charger. In case of failure, please contact
customerservice@maverixusa.com
To prevent moisture or any other element from damaging your skateboards, its
battery and engine, it is strongly recommended to always close the cover of the
charger plug, located on the battery block of your
MAVERIX skateboard .
To avoid deterioration of the connections, unplug the charger by the ends
without pulling on the wire.
Powering on your MAVERIX Electric Skateboard
Your
MAVERIX skateboard is equipped with a power button "ON / OFF" on the
side of the battery pack of your board .