Maverix USA border cross, Руководство пользователя

Страница: 10 / 21

10
ON/OFF
The on/off switch is located on the top of the wireless remote. Your remote is
equipped with LED lights.
Turn on your remote by using the black switch to the « I », position. The remote
control will beep once; it means it is powered on. To turn off, move the switch to the
« O » position, the remote control is turned off.
To use with lights move the switch to the « II » position. You will be simultaneously
using the remote control lights (LEDs located in front of your remote control) and be
turning on your remote control device.
IMPORTANT: If the Wireless Remote Control beeps 8 times in a row, it means the
batteries are running down and should be replaced. Do not ride the board with low
batteries. Doing so puts you at the risk of running out of power for the remote while
out on a ride. If your remote loses power you will be unable to power your board.
Accelerating & Braking
To accelerate, step on your board and slowly pull the trigger towards you. Your
Maverix USA skateboard will begin to accelerate with the pressure you apply on the
trigger. Once the trigger is fully engaged back towards you, you will be at the
highest traveling speed at the level you previously chose in the handle, 1, 2 or 3.
To return your Maverix USA skateboard to the neutral or freewheel position simply
begin to release on the trigger back to the central neutral position. On a level
surface, this may bring your board to a complete stop. If it does not, you can apply
the brake.
To decelerate, you can slowly release the trigger as stated above.
To STOP the skateboard your Maverix USA board comes equipped with ABS brakes.
Push the trigger AWAY from you. This will engage the brakes and bring you to a stop.
ON + Lights
OFF
ON