HOLD button (above the CAL button) to raise the display temperature to the known temperature or press ° F/° C button
(below the CAL button) to lower the display temperature. Stop pressing the CAL button and the new calibrated
temperature will stop flashing in a few seconds. The thermometer has now been calibrated.
° F /° C
– switches between Fahrenheit and Celsius.
L/R
– Switches between Right hand and Left hand and rotates the temperature in the display 180 degrees
Other Features
The unit turns off automatically when the probe is closed.
The LCD has a backlight that turns on automatically for approximately 30 seconds when the probe is opened or
whenever any button is pushed.
The unit has a Low battery display to indicate when batteries need to be changed. BLO will appear on the display.
Before First Use
•
There is a
static cling label
over the LCD display and a protective film over the whole black
faceplate
, please remove before
use.
•
Your unit comes with 2 AAA batteries. Remove the battery door on the back of the unit and insert the batteries with proper
+/- (polarity) orientation
•
Clean the stainless steel tip with warm soapy water. Rinse and let dry.
•
The unit should NOT be submerged in water or put in a dishwasher.
•
Do not leave unit in oven or grill.
•
Read all instructions
Getting Started
•
Unfold probe completely into the open and locked position
Insert into meat or food up to 1” for an accurate reading.
Operating Range
•
Temperature sensor is in the tip of the probe.
•
The unit will take temperature range from -40
°
F to 660
°
F.
Care of Your Thermometer
•
Do not place the unit in the dishwasher.
