Maverick Pathfinder 2600 HPS, Руководство пользователя

Страница: 15 / 21

15
WIRING
Wiring
A wiring diagram of your Pathfinder 2600 HPS has been included to help troubleshoot any electrical problems or add
additional electronics or electrical connections. We recommend you use a trained marine electrician for all electrical issues.
Inside the console on the starboard side is the ground terminal and the breaker pannel is located in the glove box. All the
grounds lead to the ground terminal and then to the battery via a large diameter black wire.
4
3
2
1
8
7
6
5
Pathfinder Main Harness
To Console
Pin # Func7on Wire Color AWG
1. Nav Lts (Instrumenta7on) Grey 16
2. Nav Lts Grey 16
3. Anc Lt (Console) Grey /White 16
4. Anc Lt (T-­‐TOP) Grey /White 16 Pin C T-­‐Top Recept
5. Horn Orange /White 16
6. Spreader Lt Blue /Black 16 Pin A T-­‐Top Recept
7. Overhead Lts Blue / Green 16 Pin B T-­‐Top Recept
8. PANEL GROUND Black 16 Console Ground Bus
To Acessories Main Harness
Pin # Func7on Wire Color AWG
1. Bilge Brown
14
2. L/W-­‐1 Brown /White 14
3. RECIRC-­‐1 Red /White 14
4. L/W-­‐2 Brown / Yellow 14
5. RELEASE WELL Brown / Orange 14
6. RECIRC-­‐2 Red / Yellow 14
7. BUBBLER Red / Orange 14
8. SALT WATER Brown / Green 14
9. FRESH WATER Brown /Black 14
10. LIVEWELL LTS Blue /White 16
11. COCKPIT LTS Blue / Red 16
12. COMPARTMENT LTS Blue /Black 16
8 PIN Plug
Pin # Func7on
1 ACC-­‐1
2 ACC-­‐2
3 ACC-­‐3
4 ACC-­‐4
5 ACC-­‐5
Always use the recommended breaker/fuse amp sizes. Oversizing or using larger breakers/fuses than required can lead to
electrical shorting and possible damage or destruction of the entire electrical system.
There are open slots on both the ground block and the breaker panel for additional electrical hook-ups. The accessory
switches should be used for any additional hook-ups to protect the entire electrical system. All additional electrical hook-ups
should be performed by a qualified marine electrician.
As a standard practice, we run pull cords forward and aft for any additional wiring needs. For your convenience and ease we
have included a nylon rigging string that runs through the rigging tubes and terminates in the bow. The nylon string will allow
you to easily run any additional wiring through the rigging tubes, thus protecting them from outside elements. We also run a
string aft to the rigging box.