Matsushita Electric EP1015-U1, Руководство по обслуживанию

Страница: 14 / 52

clutch hex nut M6 (see Figure) to move to the position where the
Pinion A and B block is visible from the back frame.
*When the massager fails to move up and down, turn clockwise
the hex nut M6 of up/down clutch.
(The massager can be moved by attaching the hex socket
ø
10 (for
nut 6 mm) to a rechargeable drill driver.)
5. Cut the cable tie as shown figure and remove the two connectors
(red, white) of the connecting cord for power supply and the
connecting cord for controller connected massager and unscrew
the ground cord of the connecting cord for power supply, remove
one screw fixing the massager side cord Fitting B and Cord wire D
and remove two cords from the massager.
14