Matsusada Precision AK Series, Инструкция по эксплуатации

Страница: 21 / 32

4 Advanced Operation
4-1
Matsusada Precision
AK series
4
Advanced Operation
4-1 Introduction
Explanation of Remote Programming Operations.
With this feature such functions as external voltage control or external monitor is available.
By using GP-IB/IEEE488 or RS 232C adapter (option), operation via PC is also possible.
4-2 Function of TB1 Interface Connector
List 4-1 Function of TB1 interface connector
TB1 SIGNAL PARAMETER
1
Remote Voltage Program In 0 to 10Vdc input = 0 to 100% rated output
2 Remote Current Program In 0 to 10Vdc input = 0 to 100% rated output
3 Output Current Monitor 0 to 10Vdc output = 0 to 100% rated output
4 Spare (out of use)
5 Common (GND of Power Supply) For 1, 2, 3, 14, 15
6 Spare (out of use)
7 Door switch (
Interlock) Short = HV ON
8 Remote reset (for Option LO
ｃ
,) Short = reset
9 Spare (out of use)
10 Spare (out of use)
11 Spare (out of use)
12 Spare (out of use)
13 Spare (out of use)
14 Reference voltage output Ref10.24V
，
4mA MAX output
15 Output Voltage Monitor 0 to 10Vdc output = 0 to 100% rated output
16 Spare (out of use)
17
Common
（
GND of Power Supply
）
For 7 , 8 , 19 , 20 , 21
18 Spare (out of use)
19
HV Status HV ON = internally relay contact is shorted
20
Internal control/external control select
Short = External control, Open = Internal
control
21 Remote switch ON/OFF Short = HV ON Open = HV OFF
22 Spare (out of use)
23 Spare (out of use)
24 Spare (out of use)
25
Current Control: EXT/INT select
Internal current control
1 13
14 25
S2 TB1
Fig. 4-1 TB1 Connector
，
S2 Switch
20-17 short
25-2 short