Introduction &
Contents
Installing your
VCR
Setting up your
VCR
Playing a
Video T
ape
Recording
Programmes
Advanced
Features
Help and
Specification
45
Record Protection Tab
When you insert a video cassette with the record protection tab removed
(for example a pre-recorded tape from a video hire shop) playback will
start straight away.
Automatic video head cleaning
The video heads are the means by which the VCR reads pictures from the
tape during playback. In the unlikely event that they become dirty enough
to be clogged, no picture will be played back. This can easily be
determined if during playback of a known good tape, there is good sound
but no picture (picture is extremely snowy). The auto head cleaning system
cleans the video heads automatically when a video is inserted and
ejected, this will prevent dirt from accumulating on the heads. Manual
cleaning may still be necessary in some cases, if this is the case, have the
VCR checked and cleaned by qualified Mastercare personnel. Head
cleaning cartridges are not recommended because they can be abrasive
to your video heads. To help prevent video head clogging, use only good
quality VHS tapes. Discard worn out tapes.
Warning: If the mains plug is cut from the mains lead of this appliance
the plug must be destroyed. A mains plug with bared wires is hazardous
if engaged in a mains output socket.
The wires in your VCR mains lead are coloured in accordance with the
following:-
The wire which is coloured Blue must be connected to the terminal in the
plug which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal in
the plug which is marked with the letter L or coloured Red.
No connection must be made to the earth terminal of the plug.
You must use a 13 amp plug (BS 1363), and fit a 3 amp fuse (BS 1362).
If any other type of plug is used a 3 amp fuse must be fitted, either in the
plug, adaptor or at the distribution board.
Wiring Instructions and Record Protection Tab
Neutral (N)
Mains lead
Live (L)
Fuse (3 AMP)
Wire clamp
3 AMP
To prevent
accidental
erasure of a
recording, break off the
record protection tab
with a screwdriver.
If you need to record onto a
tape that he tab has been
removed from, cover the
hole with a small piece of
adhesive tape.
VP9408.qxd 14/04/00 15:02 Page 45
Содержание VP9408
Страница 1: ...VP9408 qxd 14 04 00 14 56 Page 1 ...