- 12 -
digit buttons on the remote control. There are
100 program storage between 0 and 99.
Band
Band
can be selected either “C” or “S” by press-
ing “
” or “
” button.
Channel
Channel
can be changed by “
” or “
” button
or Digit Buttons.
Colour System
By pressing “
” or “
” button, select
Colour
System.
Press “
” or “
” button to change the
colour system to
PAL, SECAM, PAL60
or
AUTO
.
If Sound System is set to
I, SECAM
is not avail-
able for the Colour System.
Note:
In EXT mode, you can choose NTSC 3.58
and NTSC 4.43 as well.
Sound System
By pressing “
” or “
” button, select
Sound
System.
Press “
” or “
” button to change the
sound system to
BG, DK, I, L or LP
.
Fine Tune
By pressing “
” or “
” button, select
Fine Tune.
Press “
” or “
” button to adjust the tuning.
Search
By pressing “
” or “
” button, select
Search.
Press “
” or “
” button to start program search-
ing. The searching will stop when a signal is
found. You can also enter a frequency value
directly by pressing the digit buttons.
VCR (Video Cassette Recorder)
• If you want to watch a
VCR
source then it will be
better to set
VCR
mode “on”. For this, while the
cursor is on this item press the “
” or “
” buttons
to set it “
On
”.
• If you want to watch a
DVD
, then you must
set this item “
Off
”.
Store Program
By pressing “
” or “
” button, select
Store
Program.
Press “
” or “
” or “
OK
” button to
store the adjustments. “Program Stored” will be
displayed on the screen.
Program menu
By pressing “
” or “
” button, select the fifth icon.
Program menu appears on the screen.
01
ITV
02
ZDF
03
CH5
04
C - 02
05
C - 05
06
C - 06
07
C - 08
08
C - 21
09
C - 23
10
C - 35
11
C - 43
12
C - 64
13
C - 68
14
S - 40
15
- - - - -
16
- - - - -
17
- - - - -
18
- - - - -
19
- - - - -
20
- - - - -
Name
Insert
Delete
APS
PROGRAM
By moving the cursor in four directions you can
reach 20 programmes in the same page. You can
scroll the pages up or down by pressing the navi-
gation buttons to see all the programmes in TV mode
(except the AV mode). By cursor action, programme
selection is done automatically.
Name:
To change the name of a decided programme, se-
lect the programme and press the RED button.
The first letter of the selected name starts to blink.
Press “
” or “
” button to change that letter and
“
” or “
” button to select the other letters. By press-
ing the RED button, you can store the name.
Insert:
Select the programme which you want to insert by
navigation buttons. Press the GREEN button. By navi-
gation buttons move the selected programme to the
decided programme space and press the GREEN but-
ton again.
Delete:
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the se-
lected programme from the programme list, and the
programmes below shift one up.
APS (Automatic Programming System)
When you press the BLUE button for APS, the follow-
ing warning screen will be displayed.
01-ENG-37737W-42737W-1072 UK-37-42 INCH 17MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)-50101853.p65
02.04.2007, 11:17
12
