background image

1: Introduction 

Chapter 1 

Introduction 

 

This mainboard has a 

Socket 478

 for the 

Intel Pentium 4 

type of 

processors supporting front side bus (FSB) speeds up to 

400 MHz

  
This mainboard has  the 

VIA VT8751(P4M266)

 Northbridge and 

VT8235 Southbridge chipsets that support 

AC 97 audio codec

and provide 

Ultra DMA

 66/100

/133 

function. It supports built-in 

USB 2.0

 providing higher bandwidth. It implements 

Universal 

Serial Bus Specification Revision 2.0 

and is compliant with 

UHCI 1.1

 and 

EHCI 0.95

. This mainboard has two 32-bit PCI 

slots, one 

4xAGP

 slot, one 

CNR

 (Communications and 

Networking Riser) slot, and an onboard 

10BaseT/100BaseTX 

Network

 interface. In addition, this mainboard has a full set of I/O 

ports including two  PS/2 ports for mouse and keyboard, one serial 
port, one VGA port, one parallel port, one MIDI/game port and 
maximum six USB ports 

(USB 2.0)

 --two back-panel ports and 

onboard USB headers make four extra USB ports by connecting 
the Extended USB Module to the mainboard. 

   

 
This mainboard is a 

Micro ATX size

 mainboard and has power 

connectors for an ATX power supply.  
 

 
 

Содержание MS9138E Series
















































Отзывы: