MATSONIC MS-5120, Руководство пользователя

Страница: 18 / 31

MS5120 Mainboard Manual
18
Boot Sequence
Allows the system BIOS to first try to boot the operating system from
the selected disk drive.
The options are: A, C (Default); C, A; C, CDROM, A; CDROM, C, A.
Swap Floppy Drive
When enabled, allows you to switch the order in which the operating
system accesses the floppy drives during boot up.
The options are: Enabled, Disabled (Default).
Boot Up Floppy Seek
When enabled, assigns the BIOS to perform floppy diskette drive tests
by issuing the time-consuming seek commands.
The options are: Enabled (Default), Disabled.
Boot Up Numlock Status
When set to On, allows the BIOS to automatically enable the Num
Lock Function when the system boots up.
The options are: On (Default), Off.
Boot Up System Speed
Allows to selection the boot up at high or low system speed.
Gate A20 Option
When Fast, allows the A20G bus line signal generated from the chipset
to directly pass to port 92H, instead of the keyboard controller. It will
speed up the system performance.
The options are: Fast (Default), Normal.