MATSONIC MS-5120, Руководство пользователя

Страница: 29 / 31

Award BIOS Setup
29
IDE HDD Auto Detection
The IDE Hard Disk Drive Auto Detection feature automatically configures
your new hard disk. Use it for a quick configuration of new hard disk
drives. This feature allows you to set the parameters for up to four IDE
HDDs. The option with (Y) is recommended by the system BIOS. You
may also key in your own parameters instead of using the preset setting by
the system BIOS. After configuring all of the settings, press <Esc> key to
return the main menu. For confirmation, enter the Standard CMOS Setup
feature.
Save and Exit Setup
After you have made changes under Setup, press <Esc> to return to the
main menu. Move cursor to ÒSave and Exit SetupÓ or press <F10> and then
press <Y> to change the CMOS Setup. If you did not change anything,
press <Esc> again or move cursor to ÒExit Without SavingÓ and press <Y>
to retain the Setup settings. The following message will appear at the center
of the screen to allow you to save data to CMOS and exit the setup utility:
SAVE to CMOS and EXIT (Y/N)?
Exit without Saving
If you select this feature, the following message will appear at the center of
the screen to allow you to exit the setup utility without saving CMOS
modifications:
Quit Without Saving (Y/N)?
Note: Default values of the various Setup items in this chapter may not be
the same ones shown on your screen.